Skip to main content

Nouveau dessin en cours (stage 3) ... ça avance, ça avance :)

Kon'banwa!

You'll find below the current state of my next chef d'œuvre!
Assez d'anglais, j'en bouffe toute la journée!
Donc, voilà le stage 3! Ça avance pas trop mal, des roseaux, des herbes, un caillou, le décor prend forme tout doucement, selon l'inspiration du moment!



Piqûre de rappel pour ceux qui prennent le train en route:
- stage 1, la naissance,
- stage 2, le retour.

Allez, courage bientôt le stage 4! On y croit!
Bonne soirée à tous, et... "Non à la dictature de l'équerre!!!" (ah non, c'est hors sujet, là!)

Bye! ;)

Tekka
Labels:

Comments

  1. Anonymous15 December 2008 at 21:34

    zen bien... vraiment joli regard.

    ReplyDelete
  2. Anonymous28 December 2008 at 21:57

    Eh, toujours aussi zoli mon TeKka.

    Dis, tjrs Ok pr le nouvel an ? G pas de nouvelles ?

    ReplyDelete
  3. Tekka29 December 2008 at 23:42

    Voui, t'inquiètes pas, a y est, j'ai l'itinéraire, le point de chute et l'heure d'arrivée.

    J'ai fait le plein de la voiture, et du coffre... héhé

    @+ ^^

    ReplyDelete

Post a Comment

Popular posts from this blog

Rebuild of a Solex carburettor 26AIC

I am always keen to rework old mechanical parts, not only to satisfy my thirst for knowledge but also for the pleasure to bring back to life an old thing long forgotten. In this article, we will review a Solex carburettor 26AIC. Here is the thing: I have been happy to discover that mobile parts were not seized :D A bit of history: This carburettor was initially fitted on Renault Juvaquatre (1938-39): Photo from Lars-Göran Lindgren (Sweden)/ Wikipedia Another variant exists for Peugeot 202 , with a slight difference however: on the top, the 26AIC for the Peugeot has two holes to attach a protector on top: The Solex 26AIC has also been used on this models: Standard Flying Eight Side Valve 1938-48 Reliant 3 Wheeler Regal 1952-58 Reliant Export 1952-62 And also on industrial engines: Coventry Climax FSM2 & FSM3 Engines 1939-49 That's all for the history bit for now, the next step is to strip it down! 😄 Stripping down t...
Post a Comment
Read more

Which controller for this project?

Here we are... What are the criteria to choose the "good" controller? - Price of the IC => this one is not a problem, those components are just so... Cheap !! Oo' - Number of pins for this project - Easy to code, as it is a first for me - Size - Availability of the coding software & kit Regarding the size, the idea is to be able to program the controller and install it on the board, or install the controller on the board and upload the code. For this reason, I do not think Arduino is a good idea. Don't get me wrong, I don't say it is not good (I am not an expert) and I should give it a try for another project, just that it does not appear the best solution to have a stand-alone controller for this project without any interface/ intermediary card. Then we have mainly two options: PIC controllers from Microchip or AVR from Atmel. After having spent a long time reading different articles, comparatives, forums, etc etc... Well... Both solutions can...
Post a Comment
Read more

Circuit architecture

Hello! This is the second post related to the Nixie clock project. Here we will set the architecture of our system. Basically, in order to have a proper clock, from end to start: #1: display device => Nixie tubes #2: cathode driver (in order to select the figure to display) => K555ID1 microchip #3: anode driver (in order to select the tube to switch on) => MPSA42 & MPSA92 #4: oscillator (quartz) #5: controller => PIC 16F1828 #6: interface for setting time on the clock #7: power supply (at least +170V are requested for the tubes and +5V for the different microchips) #3 is requested as we want to have multiplexed Nixie: Multiplexing Nixie means control several tubes with only 1 cathode driver (the straight design would request one driver per tube). This way, one chip will switch on the same cathode on 2 or more tubes. It is necessary then to select which tube to apply voltage on, through the anode driver. Circuit architecture can be summarised as follo...
Post a Comment
Read more