Skip to main content

Bienvenue à... Caribou !!

Ce soir, après le taf, je me suis décidé à pousser jusqu'au supermarché, histoire d'acheter de quoi survivre en cette période de grand froid. Et là, paf, une idée (si si, j'vous jure, ça m'arrive aussi!). Je fais juste un petit crochet à la Jardinerie pour acheter un 'tit pot pour une pauvre plante verte qui vivote tant bien que mal dans une bouteille d'eau depuis 4 mois (et oui, je sais, c'est moche, mais elle revient de loin) et... j'ai craqué sur une nouvelle plante tropicale...
Qu'est ce qu'on ne ferait pas pour se donner des idées de dépaysement.
Enfin, j'ai donc bloqué sur une variété de fougère vivant normalement dans les forêts tropicales de l'hémisphère sud, de son petit nom Platycerium bifurcatum, aka "Corne d'élan".

Du coup, c'est un peu facile, elle s'appelle maintenant "Caribou" (petite habitude entre potes de donner des surnoms aux plantes...).
;-)

Voici la bête en gros plan:
Et Caribou dans son milieu naturel d'adoption:Vous pardonnerez l'arrière-plan, mais bon, on se refait pas!
Ah oui, et puis la suspension foireuse en ficelle de rôti, mais j'ai pas mieux pour le moment.

Alà! C'était le petit mot de la soirée. Bienvenue et longue vie à Caribou !!!

Kenavo
Labels:

Comments

  1. Anonymous2 December 2008 at 22:08

    Bienvenue et longue vie à Caribou!
    biss

    ReplyDelete

Post a Comment

Popular posts from this blog

Rebuild of a Solex carburettor 26AIC

I am always keen to rework old mechanical parts, not only to satisfy my thirst for knowledge but also for the pleasure to bring back to life an old thing long forgotten. In this article, we will review a Solex carburettor 26AIC. Here is the thing: I have been happy to discover that mobile parts were not seized :D A bit of history: This carburettor was initially fitted on Renault Juvaquatre (1938-39): Photo from Lars-Göran Lindgren (Sweden)/ Wikipedia Another variant exists for Peugeot 202 , with a slight difference however: on the top, the 26AIC for the Peugeot has two holes to attach a protector on top: The Solex 26AIC has also been used on this models: Standard Flying Eight Side Valve 1938-48 Reliant 3 Wheeler Regal 1952-58 Reliant Export 1952-62 And also on industrial engines: Coventry Climax FSM2 & FSM3 Engines 1939-49 That's all for the history bit for now, the next step is to strip it down! 😄 Stripping down t...
Post a Comment
Read more

Which controller for this project?

Here we are... What are the criteria to choose the "good" controller? - Price of the IC => this one is not a problem, those components are just so... Cheap !! Oo' - Number of pins for this project - Easy to code, as it is a first for me - Size - Availability of the coding software & kit Regarding the size, the idea is to be able to program the controller and install it on the board, or install the controller on the board and upload the code. For this reason, I do not think Arduino is a good idea. Don't get me wrong, I don't say it is not good (I am not an expert) and I should give it a try for another project, just that it does not appear the best solution to have a stand-alone controller for this project without any interface/ intermediary card. Then we have mainly two options: PIC controllers from Microchip or AVR from Atmel. After having spent a long time reading different articles, comparatives, forums, etc etc... Well... Both solutions can...
Post a Comment
Read more

Circuit architecture

Hello! This is the second post related to the Nixie clock project. Here we will set the architecture of our system. Basically, in order to have a proper clock, from end to start: #1: display device => Nixie tubes #2: cathode driver (in order to select the figure to display) => K555ID1 microchip #3: anode driver (in order to select the tube to switch on) => MPSA42 & MPSA92 #4: oscillator (quartz) #5: controller => PIC 16F1828 #6: interface for setting time on the clock #7: power supply (at least +170V are requested for the tubes and +5V for the different microchips) #3 is requested as we want to have multiplexed Nixie: Multiplexing Nixie means control several tubes with only 1 cathode driver (the straight design would request one driver per tube). This way, one chip will switch on the same cathode on 2 or more tubes. It is necessary then to select which tube to apply voltage on, through the anode driver. Circuit architecture can be summarised as follo...
Post a Comment
Read more